How do you set up a Hobie 16 Trapeze? (Installing the system on the boat)? - installing boat seats
I have it outside of eBay and has two son, who at the head of the T-handles are oval to determine where the two rings of the seat, a bungee ~ 4 feet and two feet ~ 2.5 channels. Then you have two small pieces of rubber small square and four trapezoidal steel with one side lacking in form. I have the main cable, but like the rest together?
Monday, January 18, 2010
Installing Boat Seats How Do You Set Up A Hobie 16 Trapeze? (Installing The System On The Boat)?
Subscribe to:
Post Comments (Atom)
3 comments:
http://www.hobiecat.com/support/pdfs/H16 ... Page 13 and 22 to examine the trapeze wires.
I have a link below so large that includes anything with Hobie Cats.
Pleasure boats Good luck -!
http://www.hobiecat.com/support/tech/sai ...
It offers a view of yacht club, that these boats are used - is nothing like the actual demonstration of the air and a fake front of you!
Close is the clip on the shroud to the mast Tang Then the back of the eye in the cable to a cord running through the eye of his tie with an ace to move abroad with the same string inside the eye that a plastic rope should have drive, it will continue to block, then tie a loop at the end of the chair, and tie the cable connects to this cycle of eating under the foot to the other side of the boat and with the end of this string and add cable power block to the eye and add the drive DO Good luck!
that can help
http://www.hobiecat.com/support/tech/sai ...
Post a Comment